Futaba GV-1 Manual de usuario descargar pdf (Pagina 32)

3434

FUNCTIONS

Speed setting rS1~rS3

The speed can be set for three points.

Connect the speed setting input "AUX(r.p.m)" to a receiver vacant channel.

(Set value check)

1Operate the switch (3-position), or

variable resistor knob.

The set values are displayed on the LCD screen in rS1->rS2-

>rS3 (slow->medium->high) order.

(Speed setting method)

1Set the switch or variable resistor knob to the de-

sired position and set the speed of that point by

pressing the DATA+ key (accelerate) or DATA-

key (decelerate).

-When not using the speed setting channel, set rS2 only.

rS1 and rS3 are disabled.

-When using a 2-position switch, set rS1 and rS3 only. rS2 is

set to the initial value (1500rpm).

(Setting range) 1000~2100rpm

(Initial value) rS1:1300rpm rS2:1500rpm rS3:1700rpm

Reference

If the speed is set to 1000rpm or less, the display will change to "-Off-" and

the governor can be turned off at that switch position.

The engine and rotor displays can be switched with the "[speed display

mode" set-up screen.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 48 49

Sin comentarios

Futaba GV-1 Manual de usuario Pagina 32